Vacuum and Wash at the Same Time
BISSELL CrossWave® HF2 wet dry vac is an amazing all-in-one hard floor cleaner that vacuums and washes hard floors at the same time.
Self-Cleaning Cycle
Includes the Rinse and Cleanout Storage Tray to automatically flush the machine clean after each use.
Powerful Vacuum + Convenient Mop for all-in-one cleaning saves you time.
Simple ON/OFF interface with no trigger to hold. Automatic fluid delivery makes sure you get the perfect amount of formula and water for the best clean.
Self-Propelled Steering makes for easy maneuverability across hard floors with minimal effort.
Hard Floor Brush Roll cleans wood, tile, linoleum, laminate, and other sealed hard floors.
Hard Floor Sanitise Formula eliminates 99.9% of bacteria*.
Keeps clean and dirty water separate so you always clean with fresh water + solution.
Includes Rinse and Cleanout Storage Tray to ensure your machine is clean after each use.
No batteries limiting your clean. Get maximum power and unlimited run time.
CrossWave HF2
Hard Floor Sanitise Formula (236ml Sample)
Multi-Surface Pet Formula (236ml Sample)
x2 Washable Filters
(1X pre-installed)
2X Hard Floor Brush Rolls
(1X pre-installed)
Storage & Cleanout Tray
3848F
7.6m
340w
80 dBA
3.99kgs
720ml
540ml
Sealed Hard Floors - including Tile, Sealed Timber, Laminate, Marble, Polished Concrete, Vinyl, Engineered Flooring, Floating Floors.
Yes
2 Years + 60 Day Money Back Guarantee
No. CrossWave HF2 automatically vacuums and mops simultaneously, and does not have a vacuum-only mode. CrossWave models without automatic fluid delivery include CrossWave HydroSteam, CrossWave Pet, and CrossWave Max Turbo.
No. CrossWave HF2 is a corded machine.
CrossWave HF2 is suitable for use on all sealed hard floors. If you can use a mop and bucket or spray mop on your floors without issue, it would broadly be safe to assume you can use a CrossWave. CrossWave only releases approximately 1 tablespoon of water per square metre. If unsure, it is recommended to perform a test patch in a discreet area first.
No. CrossWave HF2 is for hard floor cleaning only.
Wash and dry your filter regularly. To maintain best cleaning performance, we recommend to change the Crosswave filter every 3-4 months. Filters are available at leading electrical retailers, and through our website.
Remove the clean water tank from your machine. You will then see a round rubber circle. Please press that in with your finger, or a pen, and lift the handle off at the same time.
You can clean the Crosswave brush roll by activating the automatic Self-Clean Cycle while docked in the supplied tray.
Your brush may also be cleaned by hand by removing it from the machine and squeezing it while under running water.
Please refer to your User Guide for thorough instructions on cleaning your CrossWave brush roll.
Ensure you are only putting lukewarm tap water (not hot or boiling) in the tank along with CrossWave compatible formula. Failing to do so can warp your tank, and erode the tank seals. If you need a new tank, you can order them from the BISSELL website.
The functions, included accessories, warranty, suction motor strength, and other features can differ between models. To find the right machine for you, use our website's compare function to compare up to three products at a time. Look for the 'Compare' or 'Compare this product' buttons.
Troubleshooting Guides
Assembly & First Use
How To Clean & Maintain
How To Remove Handle
Troubleshooting Brush Roll Not Turning
Troubleshooting Leaking
Troubleshooting No/Low Spray
Troubleshooting Low/No Suction
Troubleshooting No Power